Bring your dreams without having to do the work. The hard part and trim work has has been done for you, it is ready for your decorations. No need to worry about rain, wind, and snow during construction. This house is completed.
This tiny house has a twenty by eight foot footprint, and is built on a purpose built trailer manufactured by Trailer Made, with two seven thousand pound axles. The deck of the trailer was insulated with approximately four inches of spray in closed cell foam, and the house itself was constructed with structurally insulated panels (SIP’s). The walls are four and a half inch panels and the roof panels are 6 and a half inches thick. SIP panels are ideally suited for THOW construction, being very dimensionally stable, and providing excellent insulation. The panels were custom cut to order by Big Sky Insulations, Inc., a manufacturer of R-Control brand SIPs in Belgrade, Montana. The tiny house has 9 energy efficient, low-e JELD-WEN premium vinyl windows. It also features 6 inch beveled western red cedar siding and a metal roof. The siding has been stained once on both sides and twice on the exposed surface. The entry door is a Feather River, Phoenix series high end insulated fiberglass door.
The interior features include 50 amp electrical service with GFCI protection for all outlets, which features two 110V – USB charging outlets conveniently located in the loft and where a kitchen table could be placed. There is a main power shutoff breaker. There is baseboard electrical heat. The tiny house has been wired for the addition of a mini split to be added to the front of the trailer.
It features plumbing that consists of pex piping and two tank-less hot water heaters, One electric only hot water heater (RHEEM – 40amp), and one propane gas over electric hot water heater (Precisiontemp), both hot water heaters are conveniently located out of sight. Having two hot water heaters will allow you to live in any climate and have hot water. It is fully plumbed for sewage and features individual Hepvo valves to replace p- trap(s). The tiny house is plumbed and ready for a standard or composting toilet. It features a fiberglass 32” shower and space efficient sink in the bathroom. The bathroom has tile flooring, a hand crafted barn style door, with custom shelves behind the door on the bathroom side. The bathroom features a 79% efficient heat recovery ventilator (VENT MICRA 60) to mitigate humidity within the tiny house This will vent all the humidity from the bathroom and blow fresh 79% heated air into the loft. The house is plumbed for a washer dryer combination or dishwasher.
The kitchen features a full nine feet of laminate counter top, a granite composite sink, delta faucet, full sized refrigerator – freezer combination. This home features hickory cabinets and pantry. It features an outside vented microwave range hood and a induction two burner cook top.
The living area has room for a full 7’3” couch and room to add a folding dining room table. The living area and kitchen have knotty pine tongue and grove wall paneling and pine trim. There is h tongue and groove hand scraped maple flooring. The loft is a full 9′ deep and 7’3” wide with a window on each side for ventilation.
We are proud of this tiny house and believe it has all the features one could want or need; with options for additions. No corner was cut during the building of this tiny house and the lucky person who purchases this home will get a solid quality tiny home that will last for decades! For only $65,000.00